The Tower
Crafted in Canada, the Tower is a 41" vertical spring reverb built for guitarists, amp users, and experimental sound artists who want something bold and physical in their signal chain. With two long springs and an all-analog signal path, the Tower delivers deep, dark, and immersive reverb tones that stand out in a mix or carry a performance on their own.
Housed in a smoked eucalyptus wood enclosure and finished with solid brass plates, the Tower is built to last—visually striking and sonically unique. Inside, soundproofing shapes the tone, cutting harsh reflections and bringing out a warmer, moodier reverb.
The analog circuitry includes optocouplers for smooth control over compression, gating, feedback, and bypass. It runs on 384 components, with only one digital chip used strictly for modulating analog signals. The result is a reverb that feels classic, but with added control and depth.
A remote foot switch is included for hands-free control during live use or recording sessions.
Important Notes:
The Tower was designed with amplifiers in mind. If you're running it through a mixer (send-return setup), we recommend using a DI box and preamp to ensure proper gain staging.
For best performance, the unit should be grounded through one of its 1/4" jacks (excluding the foot switch jack).
Free shipping in Canada and the US.
International customers, contact us at sales@daysofyoreaudio.com for rates.
Features:
Efficient operation with included 18V, 1.4A power supply
Easily accessible on/off switch located above the DC input
Orange light indicates power and status
Connectivity features: input/output jacks, send/return jacks for external processing, throughput for signal routing, and remote footswitch jack with buffered bypass and feedback activation for a total of seven ¼” jacks
Gated reverb activation controlled by an on/off switch, dynamically triggered by input signal - Adjustment of attack, sustain, and release parameters for reverb response
Controls for vibrato depth and rate for modulation - Feedback section for adjusting intensity and trail length (applied to wet only)
Central mixer settings: wet, dry, and volume knobs, followed by return, dry, and wet controls for send/return jacks - Drive knob for boosting signal intensity into springs
Adjustable input knob with LED VU meter monitoring - Spring pick-up knob for fine-tuning reverb character
Single-knob compressor for enhancing reverb presence in the mix
Additional information:
Footswitch: remote with stereo ¼” TRS
Power supply: included
Input: ¼” TS Unbalanced
Output: ¼” TS Unbalanced
Current consumption: 560 mA
Power consumption: 11 W
Dimensions: 41" h x 8.5" w x 8.5" d (excluding remote foot switch)
Weight: 35lbs (excluding remote foot switch)
Crafted in Canada, the Tower is a 41" vertical spring reverb built for guitarists, amp users, and experimental sound artists who want something bold and physical in their signal chain. With two long springs and an all-analog signal path, the Tower delivers deep, dark, and immersive reverb tones that stand out in a mix or carry a performance on their own.
Housed in a smoked eucalyptus wood enclosure and finished with solid brass plates, the Tower is built to last—visually striking and sonically unique. Inside, soundproofing shapes the tone, cutting harsh reflections and bringing out a warmer, moodier reverb.
The analog circuitry includes optocouplers for smooth control over compression, gating, feedback, and bypass. It runs on 384 components, with only one digital chip used strictly for modulating analog signals. The result is a reverb that feels classic, but with added control and depth.
A remote foot switch is included for hands-free control during live use or recording sessions.
Important Notes:
The Tower was designed with amplifiers in mind. If you're running it through a mixer (send-return setup), we recommend using a DI box and preamp to ensure proper gain staging.
For best performance, the unit should be grounded through one of its 1/4" jacks (excluding the foot switch jack).
Free shipping in Canada and the US.
International customers, contact us at sales@daysofyoreaudio.com for rates.
Features:
Efficient operation with included 18V, 1.4A power supply
Easily accessible on/off switch located above the DC input
Orange light indicates power and status
Connectivity features: input/output jacks, send/return jacks for external processing, throughput for signal routing, and remote footswitch jack with buffered bypass and feedback activation for a total of seven ¼” jacks
Gated reverb activation controlled by an on/off switch, dynamically triggered by input signal - Adjustment of attack, sustain, and release parameters for reverb response
Controls for vibrato depth and rate for modulation - Feedback section for adjusting intensity and trail length (applied to wet only)
Central mixer settings: wet, dry, and volume knobs, followed by return, dry, and wet controls for send/return jacks - Drive knob for boosting signal intensity into springs
Adjustable input knob with LED VU meter monitoring - Spring pick-up knob for fine-tuning reverb character
Single-knob compressor for enhancing reverb presence in the mix
Additional information:
Footswitch: remote with stereo ¼” TRS
Power supply: included
Input: ¼” TS Unbalanced
Output: ¼” TS Unbalanced
Current consumption: 560 mA
Power consumption: 11 W
Dimensions: 41" h x 8.5" w x 8.5" d (excluding remote foot switch)
Weight: 35lbs (excluding remote foot switch)