Housed in a 100% black walnut enclosure
Featuring a custom-designed two spring tank
The Echoic Drift is an 18.5 inch spring reverb
Delivering a dark, immersive sound.
analog circuitry
musical and nuanced reverb
Warm, natural tones, with optocoupler technology providing smooth, responsive control.
Designed and made in Canada
Timeless craftsmanship with simple elegance.
The Echoic Drift achieves optimal performance when grounded (earth). This connection is essential and can be established through any of its 1/4'' jacks, excluding the remote foot switch.
The Echoic Drift was designed for guitarists/bassists to plug in and run straight to the amplifier.
For optimal performance in send-return setups with mixers, we recommend using a DI box and/or preamp to ensure proper gain staging and functionality.
Features
Included 18V, 300mA power supply
On/off switch located above the DC input
Orange light indicates power and status
Connectivity features: input/output jacks, send/return jacks for external processing, throughput for signal routing, and remote footswitch jack with buffered bypass and feedback activation for a total of seven ¼” jacks
Gated reverb activation controlled by an on/off switch, dynamically triggered by input signal - Adjustment of attack, sustain, and release parameters for reverb response
Controls for vibrato depth and rate for modulation - Echo section for adjusting echo time and repetitions (applied to wet only)
Central mixer settings: wet, dry, and volume knobs, followed by return, dry, and wet controls for send/return jacks - Drive knob for boosting signal intensity into springs
Adjustable input knob with LED VU meter monitoring - Spring pick-up knob for fine-tuning reverb character
Single-knob compressor for enhancing reverb presence in the mix
additional information
Foot switch: remote with mono ¼” TS
Power supply: included
Input: ¼” TS Unbalanced
Output: ¼” TS Unbalanced
Current consumption: 180 mA
Power consumption: 3.24 W
Signal-to-Noise Ratio (SNR): approximately -30dB
Dimensions: 18.5" h x 8.5" w x 8.5" d (excluding remote foot switch)
Weight: 15lbs (excluding remote foot switch)ix